Electrolytic capacitor welding direction

How do you Weld a capacitor?

But in large-can capacitors like snap-ins and screw-terminal styles, the tabs are riveted or welded on the underside of the capacitor tops to terminal inserts. Welding produces the lowest contact resistance and highest current handling. Both resistive welding and ultrasonic welding are used.

Are electrolytic capacitors a viable alternative for large capacity CD welding systems?

Electrolytic capacitors (E-caps) offer a potential alternative for large capacity CD welding systems. E-caps incorporate an electrolyte impregnated into a separator. The separator is then sandwiched between anodic and cathodic foils. A dielectric is also used to prevent direct contact of the foils with the electrolyte.

Which type of capacitor is welded or riveted?

In SMT capacitors and miniature capacitors with rubber-bungs, extensions of the tabs are the capacitor terminals. But in large-can capacitors like snap-ins and screw-terminal styles, the tabs are riveted or welded on the underside of the capacitor tops to terminal inserts. Welding produces the lowest contact resistance and highest current handling.

Do electrolytic capacitors yield identical weld performance results?

The results presented here indicate that electrolytic capacitors, configured to provide similar charge voltage and energy storage, can yield identical weld performance results. Process, mechanical strength, and metallographic results are all identical for the two capacitor arrangements.

What is capacitor discharge welding?

Capacitive discharge welding, particularly for large-scale systems, is typically done using film-type capacitors. These capacitors store energy along alternating plates separated by a dielectric film. Charge is stored statically along the lengths of the plates. The basic configuration of the film capacitor is provided in Figure 1.

Does a film capacitor provide a similar voltage tolerance for CD welding?

Performance was evaluated based on current range behavior and metallographic response. Conclusions from this work include: to film capacitors – An array was developed to provide similar voltage tolerance and system capacitance to a standard film variant conventionally used for CD welding.